Toyota Land Cruiser

 Service Manual

Maintenance
Brake

INSPECTION

1. INSPECT BRAKE LINE PIPES AND HOSES

HINT: Check in a well lighted area. Check the entire circumference and length of the brake hoses using a mirror as required. Turn the front wheels fully right or left before checking the front brake.

(a) Check the all brake lines and hoses for damage.

(b) Check the all brake lines and hoses for wear.

(c) Check the all brake lines and hoses for deformation.

(d) Check the all brake lines and hoses for cracks.

(e) Check the all brake lines and hoses for corrosion.

(f) Check the all brake lines and hoses for leaks.

(g) Check the all brake lines and hoses for bends.

(h) Check the all brake lines and hoses for twists.

(i) Check all clamps for tightness and connections for leakage.

(j) Check that the hoses and lines are clear of sharp edges, moving parts and the exhaust system.

(k) Check that the lines installed in grommets pass through the center of the grommets.

2. INSPECT FRONT AND REAR BRAKE PADS AND DISCS (FRONT PADS: BR-16 ) (REAR PADS: BR-25 ) (FRONT DISCS: BR-21 ) (REAR DISCS: BR-30 )

3. INSPECT PARKING BRAKE LININGS AND DRUMS (BR-36 )

Body

Brake

Chassis

Engine

Inside vehicle

Outside vehicle

Under hood