Toyota Land Cruiser

 Service Manual

Body Mechanical » Upper back door
Disassembly

1. REMOVE ASSIST GRIP

(a) Using a screwdriver, remove the 2 assist grip plugs.

HINT: Tape the screwdriver tip before use.

(b) Remove the 2 screws and assist grip.

2. REMOVE INSIDE HANDLE BEZEL

3. REMOVE CENTER BACK DOOR GARNISH

Using a screwdriver, remove the center back door garnish.

HINT: Tape up the screwdriver tip before use.

4. REMOVE BACK DOOR GARNISH

Using a screwdriver, remove the back door garnish.

HINT: Tape up the screwdriver tip before use.

5. REMOVE REAR WIPER ARM

(a) Open the cover.

(b) Remove the nut and rear wiper arm.

Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)

(c) Remove the grommet.

6. REMOVE REAR WIPER MOTOR AND LINK ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 2 bolts.

(c) Unfasten the 3 bolts and remove the rear wiper motor and link assembly.

Torque: 5.0 N·m (51 kgf·cm, 44 in.·lbf)

7. REMOVE REAR WIPER MOTOR RELAY

Remove the bolt and rear wiper motor relay.

8. REMOVE BACK DOOR WEATHERSTRIP

Remove the back door weatherstrip.

NOTICE: Do not pull strongly on the weatherstrip as it may tear.

9. REMOVE BACK DOOR INSIDE HANDLE

(a) Remove the 2 bolts.

(b) Disconnect the back door lock locking rod and back door lock inside opening link, then remove the back door inside handle.

10. REMOVE BACK DOOR CONTROL

(a) Disconnect the links.

(b) Remove the 3 bolts.

Torque: 5.0 N·m (51 kgf·cm, 44 in.·lbf)

(c) Disconnect the connector, then remove the back door control.

HINT: At the time of reassembly, please refer to the following item.

Apply MP grease to the sliding surface of the back door control.

11. REMOVE BACK DOOR OUTSIDE HANDLE ASSEMBLY

(a) Using a screwdriver, remove the back door outside handle.

HINT: Tape up the screwdriver tip before use.

(b) Remove the 3 bolts and back door outside handle assembly.

Torque: 5.0 N·m (51 kgf·cm, 44 in.·lbf)

12. REMOVE LICENSE PLATE LIGHTS

13. REMOVE BACK DOOR LOCK

Remove the 4 bolts and back door lock.

Torque: 7.0 N·m (71 ft·lbf, 62 in.·lbf)

14. REMOVE BACK DOOR LINK PROTECTOR

REASSEMBLY

Reassembly is in the reverse order of disassembly

Adjustment

Disassembly