Head restraints are provided for all seats.
Vertical adjustment
Push the head restraint up or down while pressing the lock release button.
Angle adjustment
Vertical adjustment
Pull the head restraint up.
Press and hold the lock release button when lowering the head restraint.
To fold
Pull the head restraint angle lever to fold the head restraint.
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Always raise the head restraint one level from the stowed position when using.
Push a flathead screwdriver into the slot.
The slot is located on the right side of the right head restraint anchor.
STEP 2
While pressing in the flathead screwdriver, pull up the head restraint.
Pull the head restraint up while pressing the lock release button.
Pull the head restraint up while pressing the lock release button.
Push a flathead screwdriver into the slot.
The slot is located on the left side of the left head restraint anchor.
STEP 2
While pressing in the flathead screwdriver, pull up the head restraint.
STEP 1
Align the head restraint with the installation holes.
STEP 2
Push down the head restraint to the lock position.
Open the zipper on the back of the third seat and stow the head restraint inside.
CAUTION
Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
|