If the engine still does not start after following the correct starting procedure or releasing the steering lock , confirm the following points.
One of the following may be the cause of the problem.
Refuel the vehicle.
Try to restart the engine once more following correct starting procedures.
One of the following may be the cause of the problem.
The engine starting system may be malfunctioning due to an electrical problem such as an open circuit or a blown fuse. However, an interim measure is available to start the engine.
One of the following may be the cause of the problem.
Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
Emergency start function
When the engine does not start, the following steps can be used as an interim measure to start the engine if the “ENGINE START STOP” switch is functioning normally.
STEP 1
Set the parking brake.
STEP 2
Put the shift lever in “P”.
STEP 3
Set the “ENGINE START STOP” switch to ACCESSORY mode.
STEP 4
Press and hold the “ENGINE START STOP” switch about 15 seconds while depressing the brake pedal firmly.
Even if the engine can be started using the above steps, the system may be malfunctioning. Have the vehicle checked by your Toyota dealer.