Toyota Land Cruiser

 Service Manual

SFI » Injector
On-vehicle inspection

1. REMOVE V-BANK COVER

2. REMOVE INTAKE AIR CONNECTOR

3. INSPECT INJECTOR RESISTANCE

(a) Disconnect the 8 injector connectors.

(b) Using an ohmmeter, measure the resistance between the terminals.

Resistance: 13.4 - 14.2 W at 20C (68F)

If the resistance is not as specified, replace the injector.

(c) Reconnect the 8 injector connectors.

4. REINSTALL INTAKE AIR CONNECTOR

5. REINSTALL V-BANK COVER

Inspection

Installation

On-vehicle inspection

Removal