Toyota Land Cruiser

 Service Manual

Body Mechanical » Body outside moulding
Removal

1. REMOVE OUTSIDE FRONT FENDER MOULDING

(a) Remove the screw.

(b) Using a heat light, heat the moulding to 40 - 60 C (104 - 140 F).

NOTICE: Do not heat the moulding excessively.

(c) Cut the adhesive tape with a knife.

NOTICE:

• If reusing the moulding, take care not to damage the moulding.
• Do not damage the body.

(d) Using a screwdriver, remove the moulding.

HINT: Tape the screwdriver tip before use.

2. REMOVE OUTSIDE FRONT DOOR MOULDING

(a) Using a heat light, heat the moulding to 40 - 60 C (104 - 140 F).

NOTICE: Do not heat the moulding excessively.

(b) Cut the adhesive tape with a knife.

NOTICE:

• If reusing the moulding, take care not to damage the moulding.
• Do not damage the body.

(c) Using a screwdriver, remove the moulding.

HINT: Tape the screwdriver tip before use.

3. REMOVE OUTSIDE REAR DOOR MOULDING

(a) Using a heat light, heat the moulding to 40 - 60 C (104 - 140 F).

NOTICE: Do not heat the moulding excessively.

(b) Cut the adhesive tape with a knife.

NOTICE:

• If reusing the moulding, take care not to damage the moulding.
• Do not damage the body.

(c) Using a screwdriver, remove the moulding.

HINT: Tape the screwdriver tip before use.

4. REMOVE UPPER REAR OUTSIDE REAR DOOR MOULDING

(a) Using a heat light, heat the moulding to 40 - 60 C (104 - 140F).

NOTICE: Do not heat the moulding excessively.

(b) Cut the adhesive tape with a knife.

NOTICE:

• If reusing the moulding, take care not to damage the moulding.
• Do not damage the body.

(c) Remove the moulding.

5. REMOVE OUTSIDE QUARTER MOULDING

(a) Using a heat light, heat the moulding to 40 - 60 C (104 - 140 F).

NOTICE: Do not heat the moulding excessively.

(b) Cut the adhesive tape with a knife.

NOTICE:

• If reusing the moulding, take care not to damage the moulding.
• Do not damage the body.

(c) Using a screwdriver, remove the moulding.

HINT: Tape the screwdriver tip before use.

Installation

Removal