Toyota Land Cruiser

 Service Manual

Body Mechanical » Rear wiper and washer
Removal

1. REMOVE REAR WIPER ARM

(a) Open the cover.

(b) Remove the nut and rear wiper arm.

(c) Remove the grommet.

2. REMOVE ASSIST GRIP

(a) Using a screwdriver, remove the 2 assist grip plugs.

HINT: Tape up the screwdriver tip before use.

(b) Remove the 2 screws and assist grip.

3. REMOVE INSIDE HANDLE BEZEL

4. REMOVE CENTER BACK DOOR GARNISH

Using a screwdriver, remove the center back door garnish.

HINT: Tape up the screwdriver tip before use

5. REMOVE BACK DOOR GARNISH

Using a screwdriver, remove the back door garnish.

HINT: Tape up the screwdriver tip before use.

6. REMOVE REAR WIPER MOTOR AND LINK ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 2 bolts.

(c) Unfasten the 3 bolts and remove the rear wiper motor with link assembly.

Inspection

Installation

Removal