Toyota Land Cruiser
Service Manual
Air conditioning » Compressor and magnetic clutch
Removal

1. RUN ENGINE AT IDLE SPEED WITH A/C ON FOR APPROX. 10 MINUTES

2. STOP ENGINE

3. DISCONNECT NEGATIVE (- ) TERMINAL CABLE FROM BATTERY

4. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

5. REMOVE ENGINE UNDER COVER

6. REMOVE DRIVE BELT (AC-16 )

7. DISCONNECT DISCHARGE AND SUCTION HOSES

Remove the 2 bolts and disconnect the both hoses.

NOTICE: Cap the open fittings immediately to keep moisture or dirt out of the system.

8. REMOVE FRONT DRIVE SHAFT LH (SA-26 )

9. REMOVE COMPRESSOR

(a) Disconnect the connector.

(b) Remove the 3 bolts and the compressor.

More about «Compressor and magnetic clutch»:

Disassembly