Toyota Land Cruiser

 Service Manual

Automatic Transmission
Vehicle speed sensor

ON-VEHICLE REPAIR

1. DISCONNECT NO. 1 VEHICLE SPEED SENSOR CONNECTOR

2. REMOVE NO. 1 VEHICLE SPEED SENSOR

Remove the bolt and the No. 1 vehicle speed sensor.

3. DISASSEMBLE NO. 1 VEHICLE SPEED SENSOR

(a) Remove the O-ring from the speedometer driven gear assembly.

(b) Remove the clip and the speedometer driven gear from the speedometer driven gear sleeve.

4. ASSEMBLE NO. 1 VEHICLE SPEED SENSOR

(a) Install the speedometer driven gear and the clip to the speedometer driven gear sleeve.

(b) Coat a new O-ring with ATF.

(c) Install the O-ring to the speedometer driven gear assembly.

5. INSTALL NO. 1 VEHICLE SPEED SENSOR

Install the No. 1 vehicle speed sensor with the bolt.

Torque: 16 N·m (160 kgf·cm, 12 ft·lbf)

6. CONNECT NO. 1 VEHICLE SPEED SENSOR CONNECTOR

7. DISCONNECT SPEED SENSOR NT AND SP2 CONNECTORS

8. REMOVE SPEED SENSOR NT AND SP2

(a) Remove the 2 bolts, speed sensor NT and SP2.

(b) Remove 2 O-rings from the speed sensor NT and SP2.

9. INSTALL SPEED SENSOR NT AND SP2

(a) Coat 2 new O-rings with ATF and install them to the speed sensor NT and SP2.

(b) Install the speed sensor NT and SP2 with 2 bolts.

Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)

10. CONNECT SPEED SENSOR NT AND SP2 CONNECTORS

Air cooled oil cooler

ATF temperature sensor

Automatic transmission system

Automatic transmission unit

Floor shift assembly

Parking lock pawl

Park/neutral position (PNP) switch

Torque converter clutch and drive plate

Valve body assembly

Vehicle speed sensor