Toyota Land Cruiser

 Service Manual

Suspension & Axle
Front wheel hub bolt

REPLACEMENT

1. REMOVE FRONT AXLE HUB (SA-12 )

2. REMOVE HUB BOLT

(a) Mount the axle hub with the disc in a soft jaw vice.

NOTICE: Close vice until it holds disc, do not tighten further.

(b) Place matchmarks on the axle hub and disc.

(c) Remove the 5 bolts and separate the axle hub from the disc.

(d) Using a press, remove the hub bolt.

3. INSTALL HUB BOLT

(a) Using an extension bar and press, install a new hub bolt.

(b) Align the matchmarks on the axle hub and disc.

(c) Install the 5 bolts to the axle hub.

Torque: 74 N·m (750 kgf·cm, 55 ft·lbf)

4. INSTALL FRONT AXLE HUB (SA-16 )

Coil spring and rear shock absorber

Differential locking system

Front axle hub

Front differential carrier

Front drive shaft

Front differential side gear shaft oil seal

Front lower suspension ARM

Front shock absorber

Front stabilizer bar

Front torsion bar spring

Front upper suspension ARM

Front wheel alignment

Front wheel hub bolt

Rear axle shaft

Rear differential carrier

Rear differential carrier (w/ Diff. Lock)

Rear differential carrier (w/ LSD)

Rear differential front oil seal

Rear lateral control rod

Rear stabilizer bar

Rear upper and lower control ARM

Rear wheel hub bolt

Steering knuckle

Tire and wheel

Troubleshooting